#58690
Cristobalite Powder, 0.01 - 0.1 mm
pure white, filler, silicon dioxide
Buy Cristobalite Powder, 0.01 - 0.1 mm:
Ordering information
Hazardous Item Disclaimer
Before checkout please check the box for the Hazardous Item Disclaimer to prove you are aware of these risks and responsibilities.
Sold only to professional users.
Please read the material safety data sheet (MSDS).
Safety Information
GHS08-2
Health Hazard
Signal word: Danger
H372: Causes damage to organs through prolonged or repeated exposure.
P260: Do not breathe dust/fume/gas/mist/vapours/spray.
P285: In case of inadequate ventilation wear respiratory protection.
P501: Dispose of contents/ container according to regional, national and international regulations.
P285: In case of inadequate ventilation wear respiratory protection.
P501: Dispose of contents/ container according to regional, national and international regulations.
No ACMI Certification Seals available.
Warnings
WARNING: Exercise care when using dry pigments. Do not eat, drink or smoke. Avoid breathing dust. Use a NIOSH-certified dust respirator. Wash hands immediately after use. If creation of dust is likely, wear protective clothing.
Precautions
Keep out of reach of children.
Downloads
- Suitability: Acrylics, Cement / Tadelakt, Ceramic, Lime / Fresco, Oil, Silicate binder, Waterglass, Tempera
- Colors: White
- Forms: powder
- Solubility in water: insoluble
-
For which application / techniques is Cristobalite Powder, 0.01 - 0.1 mm suitable?
Cristobalite Powder, 0.01 - 0.1 mm is suitable for Tempera, Ceramic, Cement / Tadelakt, Oil, Silicate binder, Waterglass, Acrylics, Lime / Fresco -
What color has Cristobalite Powder, 0.01 - 0.1 mm?
Cristobalite Powder, 0.01 - 0.1 mm has the color White.